2000 - 2006 BMW E46 M3 - Performance DME Tuning - S54B32 - MSS54 MSS54HP

This DME (ECU / ECM / PCM / Engine Control Unit) software upgrade is for:

  • BMW E46 M3 - Engine S54B32 - 2000 2001 2002 2003 2004 2005 2006
  • BMW E36 Z3M - Engine S54B32 - 2001 2002
  • Other BMW models with S54B32 conversions/swaps. (E30/E36/E34/E39/etc)

Features:

  • Improved throttle response, can be requested to leave stock pedal sensitivity.
  • Improved wide open throttle and part throttle horsepower and torque
  • Gains 10-25WHP 10-25WTQ, depending on vehicle condition and wear.
  • Rev limiter raised 300rpm, can be set to another requested spec.
  • Speed Limiter Disabled
  • Optional CSL SMG tuning available, need to mail in DME and SMG modules, we do not do the CSL shifting/launch control remotely.
  • Optional Sport Button Memory
  • Optional Shift Lights via Oil Temp LEDs for Manual Transmission cars. 
  • Premium Gasoline required for maximum performance
  • Dyno RPM limiter is disabled, so you can rev to redline in case of ABS failure or if dyno testing the vehicle. No need to pull fuses, or use scan tool to enable dyno mode.
  • EWS Delete is optional and can be combined with a tune for a discount.

Please Note:

  • We do not offer tuning for emission delete, we do not disable catalytic converter or secondary air pump systems. 
  • We do not offer tuning services to the state of California.

We have 2 methods of having this tune installed (Flash Type Selection).

Method 1 - BENCH:  Remove the DDE/ECU and mail it in. We will create a full backup image of your ECU without opening the lid or any physical damage to the ECU at all. We then upload our tune and mail the DDE/ECU back. This is the safest way, as we can have a full backup of the entire ECU content.

Method 2 - REMOTE FLASH (Recommended): No downtime!!! With this option, once an order is placed, we will ship you a cable. You will then be able to connect the cable to your OBD2 port and laptop, and read/write your own DME/ECU on your own. Best of all it's most convenient for you to flash it anytime.

We will send you our new flasher software to download with instruction. With this flasher tool you can Read and Write our tuning files by yourself, and also be able to read/clear fault codes and adaptations. 

*You will need a Windows 8 or newer laptop and WIFI to flash remotely (Apple, Chromebooks are not supported)* INPA/Bimmergeeks K+DCAN cable will also work and are supported for remote flashing. You will need to purchase a cable from us for remote flashes if you don't have one. 

Please print out this form and mail it in with your DME. DME will not be flashed until the form is filled out and sent to us. If we are remote flash tuning, the form will have to be filled out, signed, and emailed before the flash appointment.  Thank you.

 

Tune Selection: Stage 1
Flash Type: Bench
In stock
Sale price$265.00

Tax excluded. Shipping calculated at checkout